100% Pass Top-selling 301a Exams - New 2023 F5 Pratice Exam
LTM Specialist Dumps 301a Exam for Full Questions - Exam Study Guide
NEW QUESTION 62
set payload {CACHE :: payload}
}
Which two profiles should be used on the virtual server? (Choose two.)
- A. http
- B. http compression
- C. stream
- D. http-transparent
- E. webacceleration
Answer: A,E
NEW QUESTION 63
Six servers have a varying number of connections that change based on the user load.
Which load balancing method should an LTM Specialist apply to divided the web application traffic to the servers on the relative performance trend?
- A. Ratio
- B. Least Sessions
- C. Predictive
- D. Least Connections
Answer: C
NEW QUESTION 64
An LTM Specialist needs to gather website statistics such as latency and throughput on the existing virtual server. This virtual server load Balances the backend web servers.
Which F5 feature will provide this?
- A. the Performance panel
- B. the AVR module
- C. the Dashboard
- D. the Statistics panel
Answer: B
NEW QUESTION 65
An LTM Specialist needs to force only FTP traffic, sourced from subnet 10.10.10.0/24 to virtual server 10.10.20.1 to the new FTP1 server. The following virtual servers are configured on the LTM device:
Traffic sourced from 10.10.10/24 must use the specific pool member for load balancing.
Which configuration change is needed to meet the requirements?
- A. Create a new virtual server for traffic sourced from 10.10.10.0/24 on port 80 that is destined to 10.10.20.1/32, and create a new pool has only the pool member FTP1 defined.
- B. Create a new virtual server for traffic sourced from 10.10.10.0/24 on traffic sourced from 10.10.10./24 on port 21 that is destined to 10.10.20.1/32, and create a new pool that has only the pool member FTP1 defined.
- C. Add FTP1 to the pool assigned to the MyVS2 virtual server, and remove all other pool member from the pool.
- D. Add FTP1 to the pool assigned to the MyVS4 virtual server, and remove all other pool members from the pool.
Answer: C
Explanation:
According to the VS matching order, first match the destination host IP, then match the destination port and finally match the source network segment. In the current network configuration, 10.10.10./24 access to 10.10.10.20.1 will hit MyVS2. If there is no error in the title, subnet 10.10.10.0 to virtual Server 10.10.20.1 to the FTP1 server,'' Is to distribute all traffic from 10.10.10.1 to FTP1, then D That's right.
NEW QUESTION 66
An application is sensitive to packet loss and unexpected session termination. A pair of LTM devices is configured in an Active/Standby high availability configuration. SNATS are NOT used and the virtual server contains a Universal Persistence profile.
which two actions must an LTM Specialist take to ensure the sessions are maintained between the client and server during an LTM device failover event while maintaining maximum uptime? (Choose two.)
- A. configure a VLAN and primary mirroring address for mirror traffic
- B. configure a OneConnect profile to mirror connections
- C. enable Mirroring for a virtual server and persistence profile
- D. configure a serial failover cable for mirror traffic
- E. enable Clone Pools for a virtual server and a persistence profile
Answer: A,C
NEW QUESTION 67
An ITM Specialist has the configuration shown:
The LTM Specialist needs to create a new virtual server in part B.
Which virtual address(es) should be used for the new virtual server?
- A. 10.90.0.1 and 10.100.0.1
- B. 10.90.0.1 and 10.12.0.1
- C. 10.120.0.1 only
- D. 10.100.0.1 and.10.120.0.1
Answer: D
NEW QUESTION 68
An LTM Specialist needs to use a set of addresses to access an Internet website in an outbound configuration.
Which feature should the LTM Specialist configure?
- A. NAT address
- B. NAT pool
- C. SNAT address
- D. SNAT pool
Answer: D
NEW QUESTION 69
A web server is being overloaded with HTTPS traffic. To decrease the load on the server, the LTM Specialist and the Server. Administrator decide to perform SSL offloading on the LTM device. The configuration of the virtual server is as follows:
Which change must be made to the configuration to perform SSL offloading?
- A. Remove the clients profile
- B. Remove the clientssl and http profiles
- C. Remove the clientssl and serverssl profiles
- D. Remove the severssl profile
Answer: D
NEW QUESTION 70
An LTM device is configure with the wildcard virtual servers displayed below.
A client connection is made to 172.24.31.14:443.
- A. VS_HTTP_WILDCARD
- B. VS_172_24_1_WILDCARD
- C. VS_HTTPS_WILDCARD
- D. VS_172_24_WILDCARD
Answer: D
Explanation:
Match the network segment first and then port.
NEW QUESTION 71
A LTM device needs to load balance active and passive FTP traffic while using only a single virtual server.
Which virtual server type should an LTM Specialist configure on the LTM device?
- A. DHCP relay
- B. Stateless
- C. Forwarding (IP)
- D. Standard
- E. Forwarding (Layer 2)
Answer: C
NEW QUESTION 72
When importing a PEM formatted SSL certificate, which text needs to appear first in the file?
- A. ...SECURITY CERTIFICATE....
- B. ...BEGIN CERTIFICATE....
- C. --START CERTIFICATE....
- D. ...SSL CERTIFICATE....
Answer: B
NEW QUESTION 73
An application is expected to maintain more than 100,000 concurrent TCP connections to a single pool member.
What is an appropriate SNAT configuration in this situation?
- A. SNAT automap enabled
- B. A SNAT pool with IP address
Explanation
One IP can establish 65,535 connections only the number of snapit's IP exceeds 100,000. AT least two snaptips are required. Options B, C, and all have only IP, which is obviously not enough - C. A SNAT pool with 4 IP addresses
- D. A static SNAT
Answer: C
NEW QUESTION 74
Refer to the exhibit.
The http monitor is applied to a pool. All members are enabled. One server responds as follows.
What is the resulting status of this poo! member?
- A. Offline (Disabled)
- B. Unavailable (Disabled)
- C. Offline (Enabled)
- D. Available (Enabled)
Answer: C
Explanation:
The first picture "Send String" and "Receive String" are not clear. Send String should be "GOOD", the response packet does not contain this keyword. Receive Disable String is completely unclear. If the response packet contains the content of Receive Disable String at this time, it will be Available (Disabled), If the content of Receive Disable String is not included, then Offline (Enabled).
NEW QUESTION 75
Refer to the exhibit.
An LTM Specialist has multiple SNAT and virtual server objects configured as in the bigip.conf shown.
The LTM Specialist tests a connection from a client with. IP 172.163.31.11 to 192.168.0.100:80.
Which two objects will show an increase in Local Traffic statistics connections?
- A. VS_B&SNAT_B
- B. VS_A&SNAT_B
- C. VS_A & SNAT A
- D. VS_ B & SNAT A
Answer: B
NEW QUESTION 76
AN LIM Specialist must upgrade the VCMP Guest active/standby LTM pair from version 11.3 to 11.5.3 on two VCMP Hosts.
where should the LTM Specialist import the latest 11.5.3 ISO images?
- A. to the VCMP Guest instances
- B. to both VCMP Hosts
- C. to the secondary vCMP Host and the standby Guest instance
- D. to the primary VCMP Host and the active Guest instance
Answer: A
NEW QUESTION 77
......
Authentic Best resources for 301a Online Practice Exam: https://lead2pass.testvalid.com/301a-valid-exam-test.html