2024 Realistic HPE6-A72 Dumps Exam Tips Test Pdf Exam Material
Powerful HPE6-A72 PDF Dumps for HPE6-A72 Questions
HP HPE6-A72 exam is intended for IT professionals who work with Aruba switching technologies and have a fundamental understanding of networking concepts. Candidates should have experience configuring and managing Aruba switches, as well as a basic understanding of network protocols and technologies. HPE6-A72 exam is also appropriate for individuals who are looking to expand their knowledge and skills in the field of Aruba switching technologies.
NEW QUESTION # 31
Match each network protocol to the correct server listening port. Not all answers will be used.
Answer:
Explanation:
NEW QUESTION # 32
What is the correct description of a Multi-Layer Switch?
- A. any switch that supports PoE, LLDP-MED and Flow Control
- B. a switch with Layer 3 routing capabilities but lacks any Layer 1 features as a consequence
- C. multi-Layer refers specifically to using chassis switches with several line cards over stack port switches
- D. has all the functionality of a Layer 2 switch and most of the functionality of a Layer 3 router
Answer: D
NEW QUESTION # 33
Core(config)# user admin password
Core(config)# interface mgmt
Core(config-if-mgmt)# ip static 10.254.16.89/22
Core(config-if-mgmt)# default-gateway 10.254.19.129
Core(config)# ssh server vrf mgmt
Core(config)# https-server vrf mgmt
You are tasked with configuring the Core switch to be managed by NetEdit. Currently, the Core switch is at factory-default settings.
Which two steps are missing? (Choose two.)
- A. Core(config-if-mgmt)# enable
- B. Core(config-if-mgmt)# no tftp-server
- C. Core(config)# https-server rest access-mode read-write
- D. Core(config-if-mgmt)# no shutdown
- E. Core(config)# https-server rest access-mode read-only
Answer: C,D
NEW QUESTION # 34
Click on the colored box that corresponds with the line that best represents Unicast traffic flow.
Answer:
Explanation:
NEW QUESTION # 35
Which two statements are true regarding Checkpoints on Aruba switches? (Choose two.)
- A. Checkpoints are available on AOS 5400R switches, as well as on all AOS-CX switches.
- B. Stacking switches using VSF or VSX will disable the Checkpoint feature.
- C. Rolling back to a prior checkpoint triggers a reboot of the switch.
- D. A checkpoint is a snapshot of the running-configuration and relevant metadata at the time the checkpoint was created.
- E. System-generated checkpoints are created after a configuration change and 5 minutes of inactivity.
Answer: A,D
NEW QUESTION # 36
ServiceOS login: admin
SVOS> password
Enter password: ********
Confirm password: ********
The login password to access an Aruba AOS-CX was lost. After connecting to the switch console port, a reboot is performed and the Service OS console is accessed as shown above.
What is the default password that is required for the admin account while under the Service OS console?
- A. "password"
- B. No password is set for this account.
- C. "forgetme!"
- D. The same login password that has lost originally.
Answer: C
Explanation:
Explanation/Reference: https://www.arubanetworks.com/techdocs/ArubaOS_83_Web_Help/Content/ArubaFrameStyles/ Management_Utilities/enab_radsec_reset_admin_enabl_pwd.htm
NEW QUESTION # 37
Refer to the exhibit.
You are in the process of configuring VSF between Access-1 and Access-2. Access-1 has been configured as the VSF Master.
What is a valid configuration for Access-2 to join the VSF stack?
- A. Access-2# configure
Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - B. Access-2# configure
Access-2(config)# vsf member 1 Access-2(config)# vsf renumber-to 2 Access-2(vsf-member-1)# link 2 2/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - C. Access-2# configure
Access-2(config)# vsf member 1 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit Access-2(config)# vsf renumber-to 2 - D. Access-2# configure
Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 2 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y
Answer: A
Explanation:
This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y
NEW QUESTION # 38
The section in blue can be ignored.
SW1(config)# interface 1/1/1-1/1/2
SW1(config-if-<1/1/1-1/1/2)# vlan access 2
SW1(config-if-<1/1/1-1/1/2)# exit
SW1(config)# interface 1/1/11-1/1/17
SW1(config-if-<1/1/11-1/1/17)# vlan access 17
SW1(config-if-<1/1/11-1/1/17)# exit
After completing the above commands, what is the expected output of show vlan with no other vlan commanded having been added?
- A.
- B.
- C.
- D.
Answer: B
NEW QUESTION # 39
Which two statements accurately describe the features of NetEdit? (Choose two.)
- A. NetEdit supports viewing and editing multiple devices using a single deployment plan.
- B. NetEdit can perform configuration and compliance validation.
- C. NetEdit includes trial licensing for up to 10 nodes.
- D. NetEdit can be used to configure and validate any third-party device that supports SSH and REST access.
- E. NetEdit can run on a mobile device using Android or Apple IOS.
Answer: A,B
NEW QUESTION # 40
Refer to the exhibit.
The above command was applied to an Aruba AOS-CX 6300M 24-port switch with 4-port SFP56 uplinks. All ports are set as access switchports.
Which ports carry VLAN 1 traffic?
- A. 1/1/8, 1/1/10, 1/1/5-1/1/24
- B. 1/1/8-1/1/10, 1/1/5-1/1/28
- C. 1/1/1-1/1/28
- D. 1/1/1-1/1/24
Answer: B
NEW QUESTION # 41
What is the binary conversion of the hexadecimal value 0x2001?
- A. 0010 0000 0000 0001
- B. 0011 0000 0000 0001
- C. 0002 0000 0000 0001
- D. 0010 0001
Answer: A
NEW QUESTION # 42
Which option correctly describes a WAN network?
- A. a network of devices over long distances but limited to within a single ISP
- B. compute resources that are networked locally over wireless
- C. the connection between two separate buildings in the same campus
- D. a group of computer resources that communicates between geographically separate location
Answer: D
NEW QUESTION # 43
What is Deep Packet Inspection?
- A. a concept that applies to firewalls, when examining packets only up through Layer 4
- B. a firewall process of examining the packet header all the way to Layer 7 in order to determine if the packet should be permitted or denied
- C. a function of Policy Based Routing that examines the entire IPv4 header to forward traffic based on factors other than destination address
- D. a machine learning method of packet inspection for the purpose of choosing which dynamic routing protocol to automatically assign
Answer: B
NEW QUESTION # 44
Which two options are the Layer 2 protocols? (Choose two.)
- A. 802.1Q
- B. RIP
- C. STP
- D. IPSec
- E. 802.11af
Answer: A,C
NEW QUESTION # 45
Refer to the exhibit.
The above scenario shows a packet from the Server destined for the Firewall. Switch-A and Switch-B are bundled as VSF stack. The LAG between the VSF stack and the firewall indicates a hash function to forward the packet on port 2/1/2.
Which statement is true regarding how Switch-A will forward the packet?
- A. Switch-A will drop the packet. Multi-Chassis lag to multi-chassis lag is not a supported feature of VSF.
- B. Switch-A will forward the packet along the VSF link to Switch-B so that it will egress on port 2/1/2 per the hash function.
- C. Switch-A will encapsulate the packet using GRE to forward to Switch-B in order for the packet to egress on port 2/1/2 per the hash function.
- D. Switch-A will forward the packet on port 1/1/2. VSF will override the typical LAG hash function used for the physical interface selection.
Answer: B
NEW QUESTION # 46
Which field in the IPv4 header indicates whether the IP packet carries TCP or UDP traffic?
- A. Protocol
- B. Identification
- C. TTL
- D. IHL
Answer: A
NEW QUESTION # 47
Refer to the exhibit.
The above output is the result of issuing the command show system resource-utilization. What command should be used to enable terminal output line by line or page by page?
- A. The command page
- B. The command more
- C. The command terminal length 30
- D. The command less
Answer: A
NEW QUESTION # 48
Interface 1/1/1 is up
Admin state is up
Link transitions: 1
Description: TO_PC-1
Hardware: Ethernet, MAC Address: 00:11:22:33:44:55
MTU 1500
Type 1GbT
Full-duplex
qos trust none
Speed 1000 Mb/s
Auto-negotiation is on
Flow-control: off
Error-control: off
MDI mode: MDIX
VLAN Mode: access
Access VLAN: 1111
Which command will produce the above output?
- A. show vlan 1111
- B. show interface vlan 1111
- C. show interface gigabit 1/1/1
- D. show interface 1/1/1
Answer: D
NEW QUESTION # 49
What is a benefit of choosing a 3-Tier design with routing at the Aggregation layer?
- A. Using access control lists (ACLs) at the Core to improve performance
- B. Connecting WAN/MPLS and Data center access to the Aggregation layer
- C. Shifting endpoint access to the Aggregation layer from the Access layer
- D. Better Core router performance by offloading processing
Answer: D
NEW QUESTION # 50
Refer to the exhibit.
The Aruba 8400 in the exhibit is member 2 of a VSX stack.
Which command will enter the interface sub configuration mode for the port, indicated by the orange square?
- A. 8400(config)# interface 2/3/17
- B. 8400(config)# interface 2/4/15
- C. 8400(config)# interface 1/7/16
- D. 8400(config)# interface 1/4/15
Answer: B
NEW QUESTION # 51
......
Guaranteed Accomplishment with Newest Aug-2024 FREE: https://lead2pass.testvalid.com/HPE6-A72-valid-exam-test.html